Strong Radiator Top&End Tank For You Repair&Replacement When It Is Leaking

Ruian Sherrock Auto Part could offer best price and quality radiator tank.Our radiator tank is smooth edges,rugged structure and very easy to fit and replacement when your plastic tank is leaking.Our raw material is approved.Some of radiator tanks have stock.So that we could offer better production time.

What is a radiator tank?

The radiator is mainly composed of three parts: the water inlet tank, the radiator core and the water outlet tank. During its operation, the hot coolant flowing out of the engine flows through the radiator inlet tank through the radiator core, and here is the same.The air flowing through the core of the radiator exchanges heat to achieve the effect of heat dissipation, and then flows back to the engine through the water outlet tank of the radiator, thus working cyclically. At present, the radiator tank is usually formed in one piece, therefore, the matching of the radiator tank and the radiator is matched. If the radiator needs to be equipped with a radiator tank with a larger capacity, the radiator tank with a corresponding capacity must be redesigned and produced, which leads to an increase in the cost of the radiator tank. In addition, the radiator tank is usually provided with a radiator tank cover for closing the water inlet. Because the temperature of the radiator tank is higher.during use, the upper radiator tank is more likely to crack.

What are the material requirements for the radiator tank?

Automotive radiator tanks need to be resistant to various complex chemical reagents such as refrigerants, pigments, calcium chloride, etc. At the same time, they require long-term high temperature resistance and coolant pulse requirements. Therefore, the following requirements are also placed on the materials.
Material requirements for radiator tank
1. Hydrolysis resistance: long-term contact with antifreeze can maintain good appearance without cracking.
2. High and low temperature resistance and high rigidity: guarantee to withstand harsh environmental changes and high load without deformation during use, giving the material a very long service life.
3. Strong and tough: ensure that the riveting process does not break.
4. Dimensional stability: to ensure smooth assembly process.
So the material of the radiator tank is mainly PA66 reinforced nylon.

How to judge when a car radiator leaks?

First of all, if it is not clear where the water leakage is, how can we judge the water leakage of the radiator? First remove the radiator and block the upper and lower water pipes. At this time, you can use the air pumping method or the water filling method. The air pumping method refers to immersing the radiator in the water, and then pumping the air into the radiator. When it comes out, it shows where the water leaks. The principle of irrigation is to fill the radiator tank with hot water, and see where the hot water seeps out to determine the location of the leak.